주요 콘텐츠로 건너뛰기

Sears Craftsman 315.109020 Blade/ Blade Cover Replacement

필요한 것

  1. Sears Craftsman 315.109020 Blade/ Blade Cover Replacement, Blade/ Blade Cover: 1 단계, 이미지 1/2 Sears Craftsman 315.109020 Blade/ Blade Cover Replacement, Blade/ Blade Cover: 1 단계, 이미지 2/2
    • Although this is not a difficult fix, it can definitely make a mess.

    • Lay down a dirty towel or work rag and place the saw on top of the towel.

    • Handle the saw with care and avoid placing your hands on or near the blade when possible.

  2. Sears Craftsman 315.109020 Blade/ Blade Cover Replacement: 2 단계, 이미지 1/3 Sears Craftsman 315.109020 Blade/ Blade Cover Replacement: 2 단계, 이미지 2/3 Sears Craftsman 315.109020 Blade/ Blade Cover Replacement: 2 단계, 이미지 3/3
    • Use the crescent wrench to remove the hex washer head screw and the washer.

    • Gently lift the blade up and pull it off of the internal threaded shaft.

    • If the hex washer head screw, or the entire blade spins as you turn the wrench, a quick jerk of the crescent wrench should loosen the screw.

    • Although many screws loosen in the clockwise direction, the hex washer head screw on this circular saw loosens in the counter-clockwise direction.

  3. Sears Craftsman 315.109020 Blade/ Blade Cover Replacement: 3 단계, 이미지 1/2 Sears Craftsman 315.109020 Blade/ Blade Cover Replacement: 3 단계, 이미지 2/2
    • Lift up on the blade cover until it unsnaps from the washer.

    • The blade cover will come off easier if the bulk of the cover is facing away from the saw.

결론

To reassemble your device, follow these instructions in reverse order.

Blake Avant

회원 가입일: 09/29/15

218 평판

안내서 2개 작성하였습니다

Cal Poly, Team 17-4, Green Fall 2015 Cal Poly, Team 17-4, Green Fall 2015 회원

CPSU-GREEN-F15S17G4

3 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 17

전체 시간: 1,002