소개

The purpose of this replacement guide is to remove the Sega plastic casing to expose the internal content for further repair.

부품

부품은 필요하지 않습니다.

  1. Using a Phillips head screwdriver remove  six screws from the bottom of the console. The six screws are marked.
    • Using a Phillips head screwdriver remove six screws from the bottom of the console.

      • The six screws are marked.

  2. Remove the two screws that attach the Genesis' connector to the rest of the console.
    • Remove the two screws that attach the Genesis' connector to the rest of the console.

      • The two screws are marked in the diagram.

  3. Slide the lock tab to the left to separate the halves of the console.
    • Slide the lock tab to the left to separate the halves of the console.

  4. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  5. Lift from the left side to remove the top of the case.
    • Lift from the left side to remove the top of the case.

  6. Using the spudger, pry the cover off of the Genesis attachment.
    • Using the spudger, pry the cover off of the Genesis attachment.

  7. Lift the top of the case to remove the cover.
    • Lift the top of the case to remove the cover.

  8. Remove the faceplate by pulling it up, then out.
    • Remove the faceplate by pulling it up, then out.

결론

To reassemble the device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Ryan Kotzebue

회원 가입일: 2010년 10월 07일

259 평판

안내서 4개 작성하였습니다

Cal Poly, Team 5-14, Maness Fall 2010 Cal Poly, Team 5-14, Maness Fall 2010 회원

CPSU-MANESS-F10S5G14

5 회원들

안내서 6개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 3

지난 30일: 15

전체 시간: 4,197