주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Sega CD Plastic Housing Removal

필요한 것

  1. Sega CD Plastic Housing Removal, Sega CD Plastic Housing Removal: 1 단계, 이미지 1/2 Sega CD Plastic Housing Removal, Sega CD Plastic Housing Removal: 1 단계, 이미지 2/2
    • Using a Phillips head screwdriver remove six screws from the bottom of the console.

    • The six screws are marked.

  2. Sega CD Plastic Housing Removal: 2 단계, 이미지 1/1
    • Remove the two screws that attach the Genesis' connector to the rest of the console.

    • The two screws are marked in the diagram.

  3. Sega CD Plastic Housing Removal: 3 단계, 이미지 1/1
    • Slide the lock tab to the left to separate the halves of the console.

  4. Sega CD Plastic Housing Removal: 4 단계, 이미지 1/1
    • Lift from the left side to remove the top of the case.

  5. Sega CD Plastic Housing Removal: 5 단계, 이미지 1/1
    • Using the spudger, pry the cover off of the Genesis attachment.

  6. Sega CD Plastic Housing Removal: 6 단계, 이미지 1/1
    • Lift the top of the case to remove the cover.

  7. Sega CD Plastic Housing Removal: 7 단계, 이미지 1/1
    • Remove the faceplate by pulling it up, then out.

결론

To reassemble the device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Ryan Kotzebue

회원 가입일: 10/07/10

271 평판

안내서 4개 작성하였습니다

Cal Poly, Team 5-14, Maness Fall 2010 Cal Poly, Team 5-14, Maness Fall 2010 회원

CPSU-MANESS-F10S5G14

4 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 7

전체 시간: 4,875