소개

A guide to remove the Top Cover of the Sega Dreamcast.

부품

부품은 필요하지 않습니다.

Verify that the console is disconnected from the AC outlet before you begin. Flip the console over on its back.
  • Verify that the console is disconnected from the AC outlet before you begin.

  • Flip the console over on its back.

  • Take note of your model number, in case replacement parts are needed.

댓글 쓰기

Remove the expansion bay by applying pressure to the small clip on the expansion bay while prying it away from the console. Remove the expansion bay by applying pressure to the small clip on the expansion bay while prying it away from the console. Remove the expansion bay by applying pressure to the small clip on the expansion bay while prying it away from the console.
  • Remove the expansion bay by applying pressure to the small clip on the expansion bay while prying it away from the console.

댓글 쓰기

Locate and remove all four black 12mm Phillips #02 screws from the underside of the console.
  • Locate and remove all four black 12mm Phillips #02 screws from the underside of the console.

  • Note: Remove the expansion bay to locate the fourth screw

댓글 쓰기

Internal components can be loose. Be careful that they do not fall out when removing the cover.
  • Internal components can be loose. Be careful that they do not fall out when removing the cover.

  • Turn the console right side up.

  • Remove the top cover by gently lifting the upper portion of the console.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

wkwong

회원 가입일: 2009년 11월 14일

414 평판

안내서 13개 작성하였습니다

Cal Poly, Team 5-1, Regan Fall 2009 Cal Poly, Team 5-1, Regan Fall 2009 회원

CPSU-REGAN-F09S5G1

5 회원들

안내서 23개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 4

지난 7일: 9

지난 30일: 44

전체 시간: 8,414