소개

Guide to replace the small logic board that contains the 3.5mm headphone jack as well as the volume wheel.

부품

부품은 필요하지 않습니다.

  1. Place your device upside down and locate the two battery compartments.
    • Place your device upside down and locate the two battery compartments.

    댓글 쓰기

  2. Press on the tabs at the bottom of the battery covers then lift up to remove.
    • Press on the tabs at the bottom of the battery covers then lift up to remove.

    • Remove batteries if they are present.

    댓글 쓰기

    • Remove the following screws:

      • Seven Phillips scres

      • One 4.5 mm Gamebit screw

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Use tweezers to take all other screws out.

    댓글 쓰기

    • Gently open the case by unfolding it over the top of the Sega Game Gear.

    • Do not pull the back of the case away, as cables are connected between both sides.

    댓글 쓰기

    • Carefully unplug the 2 white-tipped connectors on the top cover.

    댓글 쓰기

    • Unscrew the screws to remove the metal covering.

    댓글 쓰기

    • The screws that need to be removed are missing from this picture.

    • Remove the two screws from the highlighted locations.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Brandon Page

회원 가입일: 2010년 04월 15일

130 평판

안내서 2개 작성하였습니다

Cal Poly, Team 28-33, Regan Spring 2010 Cal Poly, Team 28-33, Regan Spring 2010 회원

CPSU-REGAN-S10S28G33

5 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 5

지난 30일: 19

전체 시간: 5,694