소개

A complete guide to replacing the main board.

부품

부품은 필요하지 않습니다.

Place your device upside down and locate the two battery compartments.
  • Place your device upside down and locate the two battery compartments.

댓글 쓰기

Press on the tabs at the bottom of the battery covers then lift up to remove.
  • Press on the tabs at the bottom of the battery covers then lift up to remove.

  • Remove batteries if they are present.

댓글 쓰기

  • Remove the following screws:

    • Seven Phillips scres

    • One 4.5 mm Gamebit screw

댓글 쓰기

  • Use tweezers to take all other screws out.

댓글 쓰기

  • Gently open the case by unfolding it over the top of the Sega Game Gear.

  • Do not pull the back of the case away, as cables are connected between both sides.

댓글 쓰기

  • Carefully unplug the 2 white-tipped connectors on the top cover.

댓글 쓰기

  • Unscrew all the marked screws.

댓글 쓰기

  • Slide the logic board out from under the circular black fastener at the top-left corner of the case.

댓글 쓰기

  • Place the logic board on a flat surface.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

Brandon Page

회원 가입일: 2010년 04월 15일

130 평판

안내서 2개 작성하였습니다

Cal Poly, Team 28-33, Regan Spring 2010 Cal Poly, Team 28-33, Regan Spring 2010 회원

CPSU-REGAN-S10S28G33

5 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 16

지난 30일: 104

전체 시간: 15,052