주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

This repair guide will take you through all the steps for removing the outer case of the Sega Genesis.

부품

지정된 부품이 없습니다.

  1. Remove the six screws from the underside of the console with a Phillips #1 screwdriver.
    • Remove the six screws from the underside of the console with a Phillips #1 screwdriver.

  2. Flip the Sega Genesis upright.
    • Flip the Sega Genesis upright.

  3. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  4. Gently lift the top casing.
    • Gently lift the top casing.

    • Note: the case will be connected to the main board by LED wires.

  5. Bend out the LED leads into vertical positions.
    • Bend out the LED leads into vertical positions.

  6. Slide the LED wire apparatus off the lead pins.
    • Slide the LED wire apparatus off the lead pins.

    • Note: observe which color wire corresponds with which length of pin.

  7. Separate the main board from the outer case.
    • Separate the main board from the outer case.

결론

To reassemble your device, follow these instructions in reverse order.

다른 12명이 해당 안내서를 완성하였습니다.

Erik Bjornstrom

회원 가입일: 2010년 10월 04일

686 평판

안내서 3개 작성하였습니다

Cal Poly, Team 3-29, Regan Fall 2010 Cal Poly, Team 3-29, Regan Fall 2010 회원

CPSU-REGAN-F10S3G29

4 회원들

안내서 11개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 11

30일 전: 64

전체 시간: 16,667