기기를 수리하세요 커뮤니티 상점

Shakespeare Synergy Steel Titanium Fishing Reel Disassembly

소개

Hello, this is a simple guide of how to disassemble a Shakespeare Synergy steel titanium fishing reel.

필요한 것

  1. Shakespeare Synergy Steel Titanium Fishing Reel Disassembly, Fishing Reel: 1 단계, 이미지 1/1

    • Remove spool cover.

    편집

  2. Shakespeare Synergy Steel Titanium Fishing Reel Disassembly, reel: 2 단계, 이미지 1/1

    • Take off bottom cover, there is a small screw in the front of the cover. After that's removed just rotate clockwise to remove.

    편집

  3. Shakespeare Synergy Steel Titanium Fishing Reel Disassembly: 3 단계, 이미지 1/1

    • Remove release handle. There is a little pin in the place that is circled. It will need to be hit out with a tiny screwdriver and hammer. After that the handle will slide right out.

    편집

  4. Shakespeare Synergy Steel Titanium Fishing Reel Disassembly: 4 단계, 이미지 1/1

    • The spring circled needs to be removed with a flat head screw driver of a small pair of pliers. after that is removed the spool topper will fall right out. Also unscrew the reel handle (what's used to reel in the line).

    편집

  6. Shakespeare Synergy Steel Titanium Fishing Reel Disassembly: 5 단계, 이미지 1/1

    • Next, take off the snap on clip on the top and pull off the spool. Be sure to keep track of the order of the washers both plastic and metal.

    편집

  7. Shakespeare Synergy Steel Titanium Fishing Reel Disassembly: 6 단계, 이미지 1/2 Shakespeare Synergy Steel Titanium Fishing Reel Disassembly: 6 단계, 이미지 2/2

    • Remove this center gear. Keep the alignment of the gears the same when you take it off.

    편집

  8. Shakespeare Synergy Steel Titanium Fishing Reel Disassembly: 7 단계, 이미지 1/1

    • Remove the crank shaft with the four screws that hold it in. Be sure that the alignment of the pins on the back side stay the same with the smallest pin facing down.

    편집

  9. Shakespeare Synergy Steel Titanium Fishing Reel Disassembly: 8 단계, 이미지 1/1

    • Next, remove the pinion gear that was sitting ion the area circled in red. Easily removed with pliers.

    편집

  10. Shakespeare Synergy Steel Titanium Fishing Reel Disassembly: 9 단계, 이미지 1/1

    • Remove the drag adjustment wheel by taking off the snap ring with a flat head screwdriver.

    편집

  11. Shakespeare Synergy Steel Titanium Fishing Reel Disassembly: 10 단계, 이미지 1/1

    • Finally, remove the center bearing. It is removed easiest by pushing two screwdrivers outwards on the inside of the bearing.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Coen Herring

회원 가입일: 08/29/23

211 평판

안내서 1개 작성함

배지: 2

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 11

30일 전: 71

전체 시간: 201