Shark Clean Sense HP102PET Filter Replacement

소개

Use this guide to replace the filter in your Shark Clean Sense HP102PET. Changing out your filter should be a regular chore when owning this device. Keeping the filter maintained ensures that your purifier is doing exactly what it was designed to do at all times.

1 단계 Filter

Shark Clean Sense HP102PET Filter Replacement, Filter: 1 단계, 이미지 2개 중 1개

Shark Clean Sense HP102PET Filter Replacement, Filter: 1 단계, 이미지 2개 중 2개

Turn off and unplug the air purifier before beginning
Carefully flip the air purifier upside down and twist the bottom cap to the unlocked position.
Remove the bottom cap.

번역하기

2 단계

Pull out the old filter using the removal tabs and discard it.
Remove all packaging and wrapping from the new filter.

번역하기

3 단계

Insert the new filter and replace the filter door. Twist the filter door until it clicks into place.
Carefully return the air purifier to the upright position, plug it back in, and turn on the power. Calibration will begin.

번역하기

4 단계

After installing a new filter, press and hold the Filter Life button on the top control panel for 3 seconds to reset the filter life percentage. The unit will beep when the filter life is reset to 100%.

번역하기