주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Shark Flex DuoClean Suction Motor Replacement

필요한 것

  1. Shark Flex DuoClean Suction Motor Replacement, Dust Cup: 1 단계, 이미지 1/2 Shark Flex DuoClean Suction Motor Replacement, Dust Cup: 1 단계, 이미지 2/2
    • Squeeze Dust Cup release buttons on either side of the component.

    • Pull up to release Dust Cup.

  2. Shark Flex DuoClean Suction Motor Replacement, Suction Motor: 2 단계, 이미지 1/1
    • Remove the five 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.

  3. Shark Flex DuoClean Suction Motor Replacement: 3 단계, 이미지 1/1
    • Use the iFixit opening tool to remove the top component.

  4. Shark Flex DuoClean Suction Motor Replacement: 4 단계, 이미지 1/1
    • Remove the two 15mm screws by twisting counterclockwise using the T10 Torx screwdriver.

  5. Shark Flex DuoClean Suction Motor Replacement: 5 단계, 이미지 1/1
    • Remove the two 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.

  6. Shark Flex DuoClean Suction Motor Replacement: 6 단계, 이미지 1/1
    • Remove the two 15 mm screws holding the motor cover by twisting counterclockwise with a T10 Torx screwdriver.

  7. Shark Flex DuoClean Suction Motor Replacement: 7 단계, 이미지 1/1
    • Cut the zip ties holding the motor using the wire cutter.

  8. Shark Flex DuoClean Suction Motor Replacement: 8 단계, 이미지 1/1
    • Cut the wires using the wire cutters to completely remove the motor.

    • For reassembly, use the soldering guide in the Introduction.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Christian Fuller

회원 가입일: 10/08/18

420 평판

안내서 3개 작성하였습니다

Cal Poly, Team S17-G5, White Fall 2018 Cal Poly, Team S17-G5, White Fall 2018 회원

CPSU-WHITE-F18S17G5

4 회원들

안내서 14개 작성하였습니다

댓글 한 개

how i need to know how to re connect the wires on replacing a new motor, my model is similar HV321.

andrea - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 26

전체 시간: 3,461