기기를 수리하세요 커뮤니티 상점

Shark IONFlex 2X Soft Brush Roll Replacement

소개

NOTE: This part of the replacement guide does not require tools.

This part of the replacement guide focuses on the replacement of the soft brush roll, which is the brush roll which is more prone to wearing out. The soft brush roll was designed to be easily replaced by the user.

  1. Shark IONFlex 2X Soft Brush Roll Replacement, Soft Brush Roll: 1 단계, 이미지 1/1

    • Press and slide the access brush roll buttons towards the "Access Brush Roll" printing on casing.

    번역하기

  3. Shark IONFlex 2X Soft Brush Roll Replacement: 2 단계, 이미지 1/1

    • Lift plastic casing upward and off of the top of the floor unit. Place off to the side.

    번역하기

  4. Shark IONFlex 2X Soft Brush Roll Replacement: 3 단계, 이미지 1/1

    • Pull the red Pull tab that is located on the right side of the soft brush roll away from the front of the vacuum and place the soft brush roll to the side.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Eric Dean

회원 가입일: 10/14/18

503 평판

안내서 2개 작성하였습니다

배지: 13

배지 +10개 더

팀

Eastern Washington University, Team S4-G1, Crane Fall 2018 Eastern Washington University, Team S4-G1, Crane Fall 2018 회원

EWU-CRANE-F18S4G1

2 회원들

안내서 15개 작성하였습니다

댓글 한 개

I’m trying to fix the plastic gear that the roller fits onto. It’s broken and I think it needs to be disassembled more and need replacement parts. Model # IF200W. Any advice??

Anthony - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 8

30일 전: 23

전체 시간: 2,608