Skip to main content

도구

No tools specified.

부품

No parts specified.

  1. Pop out the two small wheels located on the front end of the bottom of the roller brush compartment.
    • Pop out the two small wheels located on the front end of the bottom of the roller brush compartment.

  2. Remove the 10 Phillips screws located on the bottom of the roller brush compartment. (Two of these screws are located under the wheels from the previous step.) The screws have varying lengths, so keep track of where each one goes for reassembly.
    • Remove the 10 Phillips screws located on the bottom of the roller brush compartment. (Two of these screws are located under the wheels from the previous step.)

    • The screws have varying lengths, so keep track of where each one goes for reassembly.

  3. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  4. Remove the white plastic cover to expose the roller compartment underneath.
    • Remove the white plastic cover to expose the roller compartment underneath.

  5. Once the vacuum top is opened, you can simply remove the motor as shown in the image.
    • Once the vacuum top is opened, you can simply remove the motor as shown in the image.

    • Make sure to untangle or unhook any wires that are connected to the motor.

    • Once this is done, you can replace the old motor with a new one.

결론

To reassemble your device, follow these instructions in reverse order.

Molina Oung

회원 가입일: 2015년 03월 27일

205 평판

안내서 1개 작성함

UMass Dartmouth, Team 5-4, Kish Spring 2015 UMass Dartmouth, Team 5-4, Kish Spring 2015 회원

UMASSD-KISH-S15S5G4

4 회원들

안내서 10개 작성하였습니다

Hi Where could I get a replacement motor from for NV501 model shark rotator .Or have the same motor rebuilt...Any help would be appreciated thank you.....

jacob - 답글

The screws on the bottom of roller brush compartment ARE NOT phillips head!!!!!!!!!!!!!!!!!!!!

randy - 답글

The screws are Phillips on mine. It may be a case of availability. If the manufacturer found a better deal on a different style of screw, they may have changed it.

Joe Evans -

The 10 screws on the roller brush compartment cover are NOT Phillips head!!!

randy - 답글

댓글 쓰기

조회 통계:

지난 24시간: 3

지난 7일: 34

지난 30일: 138

전체 시간: 8,275