기기를 수리하세요 커뮤니티 상점

Shark Professional Steam Pocket Mop Front Panel Disassembly

작성자 Brett Wilson (또 다른 기여자 2명)
게시일: May 21, 2018
  • 댓글 2
  • 즐겨찾기 0
  • 조회수: 3.8k

Shark Professional Steam Pocket Mop Front Panel Disassembly

작성자 Brett Wilson (또 다른 기여자 2명)
게시일: May 21, 2018
  • 댓글 2
  • 즐겨찾기 0
  • 조회수: 3.8k

분해도

소개

This guide will start with opening the front panel. This will expose the control panel and more screws for further disassembly. Before doing any disassembly on your Shark Professional Steam Pocket Mop, make sure to unplug both the mop and empty the water tank for your safety.

필요한 것

해당 분해도는 수리 안내서가 아닙니다. Shark Professional Steam Pocket Mop 수리는 저희 서비스 설명서를 사용하십시오.

  1. Shark Professional Steam Pocket Mop Front Panel Disassembly, Shark Professional Steam Pocket Mop Front Panel Disassembly: 1 단계, 이미지 1/2 Shark Professional Steam Pocket Mop Front Panel Disassembly, Shark Professional Steam Pocket Mop Front Panel Disassembly: 1 단계, 이미지 2/2

    • Unwrap the power cord from the handle.

    • Remove the 56.0 mm Phillips head #2 screw located above the water tank cap.

    • Pull the handle to separate it from the body.

    번역하기

  2. Shark Professional Steam Pocket Mop Front Panel Disassembly: 2 단계, 이미지 1/3 Shark Professional Steam Pocket Mop Front Panel Disassembly: 2 단계, 이미지 2/3 Shark Professional Steam Pocket Mop Front Panel Disassembly: 2 단계, 이미지 3/3

    • Remove the three 12.0 mm Phillips head #2 screws where the handle connects to the body.

    • Remove the plastic cap.

    번역하기

  4. Shark Professional Steam Pocket Mop Front Panel Disassembly: 3 단계, 이미지 1/2 Shark Professional Steam Pocket Mop Front Panel Disassembly: 3 단계, 이미지 2/2

    • Remove the three 16.0 mm T10 Torx screws near the top of the body and remove the water tank cap.

    • The third screw is directly on other side of the bottom screw in the photo.

    번역하기

  5. Shark Professional Steam Pocket Mop Front Panel Disassembly: 4 단계, 이미지 1/3 Shark Professional Steam Pocket Mop Front Panel Disassembly: 4 단계, 이미지 2/3 Shark Professional Steam Pocket Mop Front Panel Disassembly: 4 단계, 이미지 3/3

    • Remove steam control button cover with a metal spudger.

    • Remove the two 12.0 mm Phillips head #2 screws underneath.

    • Remove the plastic rim with clear plastic cover.

    번역하기

  6. Shark Professional Steam Pocket Mop Front Panel Disassembly: 5 단계, 이미지 1/3 Shark Professional Steam Pocket Mop Front Panel Disassembly: 5 단계, 이미지 2/3 Shark Professional Steam Pocket Mop Front Panel Disassembly: 5 단계, 이미지 3/3

    • Remove the Shark logo decal on the front of body using a metal spudger.

    • Remove the two 12.0 mm Phillips head #2 screws underneath.

    • Pull out the plastic cover to remove.

    번역하기

  7. Shark Professional Steam Pocket Mop Front Panel Disassembly: 6 단계, 이미지 1/1

    • Pop off the grey front plate to expose the control panel and screws necessary to open mop body.

    번역하기

작성자

다른 기여자 2명과 함께

Brett Wilson

회원 가입일: 02/12/18

992 평판

안내서 6개 작성하였습니다

배지: 14

배지 +11개 더

팀

USF Tampa, Team S15-G1, Boczar Spring 2018 USF Tampa, Team S15-G1, Boczar Spring 2018 회원

USFT-BOCZAR-S18S15G1

4 회원들

안내서 14개 작성하였습니다

댓글 한 개

Here is a video to help with dismantling if you'd like to see the possible original guide first posted on YouTube by George Robles September 16, 2015 years before.

https://youtu.be/18mMbbMjqzs

No one knew or posted before me because I looked everywhere and why I created the video.

But I am curious where you got your information from if it was not my video.

George Robles - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 22

30일 전: 79

전체 시간: 3,890