주요 콘텐츠로 건너뛰기

Shark Rotator Lift-Away Speed Brushroll Replacement

필요한 것

  1. Shark Rotator Lift-Away Speed Brushroll Replacement, Brushroll: 1 단계, 이미지 1/1
    • Make sure the vacuum is turned off and unplugged before proceeding.

    • Locate the release button at the top of the vacuum pod next to the handle.

    • Use the handle to lift the pod up off of the vacuum nozzle while pressing the release button.

    • Removing the pod is optional, but it may be easier to locate blockages or access the motor and belt if you do so.

  2. Shark Rotator Lift-Away Speed Brushroll Replacement: 2 단계, 이미지 1/2 Shark Rotator Lift-Away Speed Brushroll Replacement: 2 단계, 이미지 2/2
    • Press the Brushroll Access buttons on the top of the nozzle to reveal the brushroll compartment.

  3. Shark Rotator Lift-Away Speed Brushroll Replacement: 3 단계, 이미지 1/2 Shark Rotator Lift-Away Speed Brushroll Replacement: 3 단계, 이미지 2/2
    • Lift the brushroll out by using the pull-tab on the left side.

    • You can test the brushroll once it has been inserted by plugging the vacuum in and running the vacuum in carpet mode. The brushroll indicator light should be a solid green color.

결론

To reassemble your device, follow these instructions in reverse order.

Weston Mongomery

회원 가입일: 10/02/17

201 평판

안내서 2개 작성하였습니다

Cal Poly, Team S15-G7, Livingston Fall 2017 Cal Poly, Team S15-G7, Livingston Fall 2017 회원

CPSU-LIVINGSTON-F17S15G7

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 7

전체 시간: 1,797