기기를 수리하세요 커뮤니티 상점

Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement

소개

This guide will show you how to replace the HEPA filter which is responsible for trapping small particles that can be easily recirculated into the air. When the HEPA Filter is extremely dirty, you may want to consider replacing it.

  1. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement, HEPA Filter: 1 단계, 이미지 1/2 Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement, HEPA Filter: 1 단계, 이미지 2/2

    • Push the red Lift Away button down and lift up on the vacuum handle to detach the base.

    • The handle was removed for convenience but is not required.

    편집

  3. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: 2 단계, 이미지 1/2 Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: 2 단계, 이미지 2/2

    • Remove the red cover from the front of the vacuum by pulling the latch found at the bottom of the cover forward and moving the whole cover downward.

    편집

  4. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: 3 단계, 이미지 1/2 Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: 3 단계, 이미지 2/2

    • Remove the filter by pulling it straight out.

    • To clean the filter, rinse it under water and allow it to dry before placing it back in the vacuum.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Carson Craft

회원 가입일: 01/24/18

251 평판

안내서 1개 작성함

배지: 10

배지 +7개 더

팀

Cal Poly, Team S19-G3, White Winter 2019 Cal Poly, Team S19-G3, White Winter 2019 회원

CPSU-WHITE-W19S19G3

5 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 7

전체 시간: 356