주요 콘텐츠로 건너뛰기

Shower Handle O-ring Replacement

필요한 것

  1. Shower Handle O-ring  Replacement, Shower Handle O-ring: 1 단계, 이미지 1/1
    • Be sure your water main is turned off, preventing water flow to your shower.

    • Using your flat head screwdriver, remove the screw from the middle of the handle.

  2. Shower Handle O-ring  Replacement: 2 단계, 이미지 1/1
    • Use your groove joint pliers to loosen and remove the escutcheon plate.

  3. Shower Handle O-ring  Replacement: 3 단계, 이미지 1/1
    • Using your groove joint pliers, loosen and remove the cartridge stem.

  4. Shower Handle O-ring  Replacement: 4 단계, 이미지 1/1
    • Slowly unscrew and remove the stem completely.

    • There may be some water leakage due to built up pressure.

  5. Shower Handle O-ring  Replacement: 5 단계, 이미지 1/2 Shower Handle O-ring  Replacement: 5 단계, 이미지 2/2
    • Using your flat head screwdriver, remove the screw from the end of the stem cartridge.

    • Once the screw is removed, replace the damaged O-ring with the new replacement O-ring.

    • When installing a new O-ring, be sure the O-ring has a tight seal to prevent further leaking.

    • Once reassembly is complete and all parts are snug, turn the water main back on to allow water to flow to the shower again.

결승점

다른 3명이 해당 안내서를 완성하였습니다.

Cori Fitzpatrick

회원 가입일: 03/20/16

213 평판

안내서 1개 작성함

Michigan Tech, Team 1-6, Lauer Spring 2016 Michigan Tech, Team 1-6, Lauer Spring 2016 회원

MTU-LAUER-S16S1G6

1 회원

안내서 1개 작성하였습니다

댓글 2개

I have to change my shower handle, but the plumber asking me to change the shower valve also. But I can’t see any reason to replace the shower valve, is it really necessary to change it when changing shower handle.

Thanks.

Rose Geiger - 답글

This fixed the dripping shower head but now my shower handles are tight and difficult to turn and the water pressure is affected after replacing the o-rings. What could the issue be?

Cin - 답글

댓글 쓰기

조회 통계:

24 시간 전: 5

7일 전: 55

30일 전: 278

전체 시간: 20,832