Skip to main content

소개

Taking out the LCD screen.

  1. Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.
    • Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.

    • Gently pry open button and remove button.

    • Do this for each of the 3 buttons remaining.

  2. The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off. The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.
    • The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.

  3. Use the Phillips head screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.
    • Use the Phillips head screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.

  4. Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.
    • Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.

    • Use the Torx 6 screwdriver to remove these 2 screws.

    • Be careful in handling the phone after removing the screws, because the two main bodies of the phone are no longer attached.

  5. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  6. After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.
    • After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.

    • You can use your hands to simply pull apart the top casing from the bottom casing.

  7. Flip the screen to its up position. Remove screen from keyboard.
    • Flip the screen to its up position.

    • Remove screen from keyboard.

  8. Remove 4 screws from back of screen.
    • Remove 4 screws from back of screen.

  9. Separate screen from housing with your fingers.
    • Separate screen from housing with your fingers.

  10. Remove 4 screws Pay attention to the orientation of the screen on the backing because it is difficult to reassemble. Pay attention to the orientation of the screen on the backing because it is difficult to reassemble.
    • Remove 4 screws

    • Pay attention to the orientation of the screen on the backing because it is difficult to reassemble.

  11. Remove LCD protective cover with your fingers.
    • Remove LCD protective cover with your fingers.

결승점

다른 2명이 해당 안내서를 완성하였습니다.

michael albaum

회원 가입일: 2010년 01월 20일

45 평판

안내서 6개 작성하였습니다

Cal Poly, Team 3-19, Maness Winter 2010 Cal Poly, Team 3-19, Maness Winter 2010 회원

CPSU-MANESS-W10S3G19

4 회원들

안내서 11개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 3,230