주요 콘텐츠로 건너뛰기

SkullCandy Hesh Size Adjuster Replacement

필요한 것

  1. SkullCandy Hesh Size Adjuster Replacement, Determine the damage: 1 단계, 이미지 1/2 SkullCandy Hesh Size Adjuster Replacement, Determine the damage: 1 단계, 이미지 2/2
    • Locate the break in the device.

  2. SkullCandy Hesh Size Adjuster Replacement: 2 단계, 이미지 1/1
    • Use a Phillips #0 screwdriver to remove the two 9 mm screws from the bottom inner casing beneath the break.

  3. SkullCandy Hesh Size Adjuster Replacement: 3 단계, 이미지 1/1
    • Remove the bottom inner casing to reveal the wire compartment and the port where the slider inserts.

  4. SkullCandy Hesh Size Adjuster Replacement: 4 단계, 이미지 1/2 SkullCandy Hesh Size Adjuster Replacement: 4 단계, 이미지 2/2
    • Cover the detached slider port in a generous layer of Plasti Dip, which works like glue. Also coat any exposed wire to seal the circuit.

  5. SkullCandy Hesh Size Adjuster Replacement: 5 단계, 이미지 1/1
    • Realign the broken size adjuster into the port with the Plasti Dip so that it can be secured to the ear piece.

  6. SkullCandy Hesh Size Adjuster Replacement: 6 단계, 이미지 1/1
    • Clamp the pieces in place by hand or with a binder clip until the Plasti Dip dries. Feel free to use a hair dryer on a low setting to speed up the process.

결론

To reassemble your device, reattach the bottom inner casing with the Phillips #0 screwdriver and two removed screws.

Sarah Burk

회원 가입일: 01/15/15

247 평판

안내서 3개 작성하였습니다

USF Sarasota-Manatee, Team 1-1, Stewart Winter 2015 USF Sarasota-Manatee, Team 1-1, Stewart Winter 2015 회원

USFSM-STEWART-W15S1G1

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 18

전체 시간: 807