Skytex Skypad Alpha 2 Back Cover Replacement - iFixit 수리 안내서

소개

By following this guide one is able to access the inside of the Skytex Skypad Alpha 2 tablet in four steps. These steps include locating and unscrewing the screws that are found at the sides of the tablet and using a plastic opening tool to separate the back case from the tablet and replace if necessary.

필요한 것

1 단계 Back Cover

Skytex Skypad Alpha 2 Back Cover Replacement, Back Cover: 1 단계, 이미지 1/1

Power off the tablet.
Unplug the tablet from the power source if it is connected.

2 단계

Skytex Skypad Alpha 2 Back Cover Replacement: 2 단계, 이미지 1/2

Skytex Skypad Alpha 2 Back Cover Replacement: 2 단계, 이미지 2/2

Remove the (4) 3.5mm screws using a phillips #000 screwdriver.

3 단계

Skytex Skypad Alpha 2 Back Cover Replacement: 3 단계, 이미지 1/1

Use the plastic opening tool to work your way around the tablet, releasing the back case from the tabs.

4 단계

Skytex Skypad Alpha 2 Back Cover Replacement: 4 단계, 이미지 1/1

Release the back case from the rest of the tablet with your hand.
Do not pry the case too hard; doing so can damage the tablet.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Elizabeth Wittliff

회원 가입일: 09/25/15

176 평판

안내서 1개 작성함

배지 +8개 더

팀

Baylor, Team 6-5, Williams Fall 2015 Baylor, Team 6-5, Williams Fall 2015 회원

BU-WILLIAMS-F15S6G5

3 회원들

안내서 8개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 7

전체 시간: 291