기기를 수리하세요 커뮤니티 상점

Slingbox 500 Top Cover Replacement

필요한 것

  1. Slingbox 500 Top Cover Replacement, Top Cover: 1 단계, 이미지 1/1

    • Remove the sticker on the back of the Slingbox that covers the rear screws using a spudger.

    번역하기

  3. Slingbox 500 Top Cover Replacement: 2 단계, 이미지 1/2 Slingbox 500 Top Cover Replacement: 2 단계, 이미지 2/2

    • Remove the seven 7.9 mm rear screws from the device using a Phillips #1 screwdriver.

    • Flip your Slingbox so the bottom is facing upwards.

    • Remove the four 7.9 mm screws using a Phillips #1 screwdriver.

    • You may have rubber feet on the bottom of your Slingbox. If you do, just gently remove them with your hands and set them aside to put back on later.

    번역하기

  4. Slingbox 500 Top Cover Replacement: 3 단계, 이미지 1/3 Slingbox 500 Top Cover Replacement: 3 단계, 이미지 2/3 Slingbox 500 Top Cover Replacement: 3 단계, 이미지 3/3

    • Remove the upper section of the case by rotating your Slingbox to view the back and lifting up on the higher corner.

    • Use the opening tool to disconnect the small clips in the front.

    • These may require some minor force to disconnect.

    • Remove the entire top of the Slingbox and set it aside.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

David Sullivan

회원 가입일: 10/18/21

365 평판

안내서 3개 작성하였습니다

배지: 4

+1개 배지 추가

팀

UMass Dartmouth, Team 1-3, Simcock Fall 2021 UMass Dartmouth, Team 1-3, Simcock Fall 2021 회원

UMASSD-SIMCOCK-F21S1G3

4 회원들

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 75