기기를 수리하세요 커뮤니티 상점

Smartab STJR700 Screen/Digitizer Replacement

필요한 것

  1. Smartab STJR700 Screen/Digitizer Replacement, Screen/Digitizer: 1 단계, 이미지 1/2 Smartab STJR700 Screen/Digitizer Replacement, Screen/Digitizer: 1 단계, 이미지 2/2

    • There are four screws with each one in each corner. Use the screwdriver to unscrew the back or bottom of the device.

    번역하기

  2. Smartab STJR700 Screen/Digitizer Replacement: 2 단계, 이미지 1/1

    • Remove the bottom or back of the device by detaching the black bottom after removing the screws.

    • the front panel should now be exposing the digitizer along with the other electronic components of the device.

    번역하기

  3. Smartab STJR700 Screen/Digitizer Replacement: 3 단계, 이미지 1/2 Smartab STJR700 Screen/Digitizer Replacement: 3 단계, 이미지 2/2

    • Next, remove the circuit board from the front panel and screen. This should leave the digitizer and circuit board intact.

    • Afterward, remove the existing damaged glass part of the device from the front panel as shown in the last picture.

    • Finally add a new STJR700 screen and reverse the previous steps to reattach the device.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Tianna Edwards

회원 가입일: 03/22/17

128 평판

안내서 1개 작성함

배지: 3

팀

UMass Dartmouth, Team S3-G4, Botvin Spring 2017 UMass Dartmouth, Team S3-G4, Botvin Spring 2017 회원

UMASSD-BOTVIN-S17S3G4

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 1,130