주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

The back panel covers internal components. This guide will help remove it in order to access those components.

부품

지정된 부품이 없습니다.

  1. Use a Phillips head 000 screwdriver to remove the 4.0mm screw at the side opposite of the USB port.
    • Use a Phillips head 000 screwdriver to remove the 4.0mm screw at the side opposite of the USB port.

  2. Use a Phillips head 000 screwdriver to remove the three 4.0mm screws on the bottom of the camera. Use a Phillips head 000 screwdriver to remove the three 4.0mm screws on the bottom of the camera.
    • Use a Phillips head 000 screwdriver to remove the three 4.0mm screws on the bottom of the camera.

  3. Tilt up the LCD screen.
    • Tilt up the LCD screen.

    • Use a Phillips head 000 screwdriver to remove the two coarse 4.0mm screws near the bottom of the camera.

  4. Gently pry off the back panel, by wiggling it around the LCD screen.
    • Gently pry off the back panel, by wiggling it around the LCD screen.

결론

To reassemble your device, follow these instructions in reverse order.

Jonathan Chen

회원 가입일: 2017년 10월 17일

645 평판

안내서 6개 작성하였습니다

UC Santa Barbara, Team S1-G1, Weedon Fall 2017 UC Santa Barbara, Team S1-G1, Weedon Fall 2017 회원

UCSB-WEEDON-F17S1G1

3 회원들

안내서 13개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 5

전체 시간: 500