주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

The LCD screen is a helpful display when taking photos. A cracked or damaged screen needs replacement.

  1. Turn off the camera by sliding the power switch.
    • Turn off the camera by sliding the power switch.

  2. Tilt up the LCD screen.
    • Tilt up the LCD screen.

  3. Use a Phillips head 000 screwdriver to remove the two 2.0mm screws on the bottom of the LCD screen.
    • Use a Phillips head 000 screwdriver to remove the two 2.0mm screws on the bottom of the LCD screen.

  4. Use a Phillips head 000 screwdriver to remove the two 1.0mm screws on the smaller backplate of the LCD screen that covers the ribbon cable. The smaller backplate should easily come off. Put it to the side. The smaller backplate should easily come off. Put it to the side.
    • Use a Phillips head 000 screwdriver to remove the two 1.0mm screws on the smaller backplate of the LCD screen that covers the ribbon cable.

    • The smaller backplate should easily come off. Put it to the side.

  5. Use a Phillips head 000 screwdriver to remove the two 1.0mm screws on the bigger backplate of the LCD. Use a Phillips head 000 screwdriver to remove the two 1.0mm screws on the bigger backplate of the LCD.
    • Use a Phillips head 000 screwdriver to remove the two 1.0mm screws on the bigger backplate of the LCD.

  6. Using the plastic opening tool, remove the larger backplate from the LCD screen. Using the plastic opening tool, remove the larger backplate from the LCD screen.
    • Using the plastic opening tool, remove the larger backplate from the LCD screen.

  7. With your hands, gently remove the black plastic piece on the backside of the LCD screen.
    • With your hands, gently remove the black plastic piece on the backside of the LCD screen.

  8. Using tweezers, gently pull up and away on the ribbon cable connected to the motherboard, after which, the LCD screen should come off. The motherboard ribbon cable has a specific connector.
    • Using tweezers, gently pull up and away on the ribbon cable connected to the motherboard, after which, the LCD screen should come off.

    • The motherboard ribbon cable has a specific connector.

결론

To reassemble your device, follow these instructions in reverse order. However, when installing the ribbon cable, the connector has a specific step. The connector has a tiny flap that clamps down onto the ribbon cable in order to make it secure.

Jonathan Chen

회원 가입일: 2017년 10월 17일

645 평판

안내서 6개 작성하였습니다

UC Santa Barbara, Team S1-G1, Weedon Fall 2017 UC Santa Barbara, Team S1-G1, Weedon Fall 2017 회원

UCSB-WEEDON-F17S1G1

3 회원들

안내서 13개 작성하였습니다

Sir, my unit has many lines that appear on the screen. However, the lcd glass is pristine & has no cracks. Which part is defective? Is the lcd mother board the culprit? Thank you.

Stevie B - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 24

전체 시간: 1,268