소개
The port board is where the power and eject buttons, the IR sensor and the USB port are located. This guide shows how to replace it.
필요한 것
-
-
Use the PH1 screwdriver to remove the two 9mm screws on the back of the Blu-ray player.
-
-
-
-
Flip the Blu-ray back up
-
Remove the ribbon connecting the port board to the motherboard.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.