주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

Sometimes you may need to replace the back cover to prevent excess dust or other material from entering the device and potentially damaging other components. This guide will show you how to replace the back cover in case yours is damaged beyond repair.

  1. Remove the disk tray cover from the device.
    • Remove the disk tray cover from the device.

  2. Using the Phillips #2 Screwdriver, remove the  five 9mm  from the bottom of the device. Remove the metal cover.
    • Using the Phillips #2 Screwdriver, remove the five 9mm from the bottom of the device.

    • Remove the metal cover.

  3. Using the Phillips #2 Screwdriver, remove the six 9mm screws from the back of the device. Using the Phillips #2 Screwdriver, remove the six 9mm screws from the back of the device.
    • Using the Phillips #2 Screwdriver, remove the six 9mm screws from the back of the device.

  4. Pull off the back panel and remove it from the device.
    • Pull off the back panel and remove it from the device.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Mitchell Novak

회원 가입일: 2020년 01월 16일

351 평판

안내서 2개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 43