소개

This will help you to remove the front cover so you can get to the other parts of the Bloggie 3D Camera.

  1. Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.
    • Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.

  2. Use a plastic opening tool to pry the cover open.
    • Use a plastic opening tool to pry the cover open.

    • After the the cover is partly open as shown, remove the cover with your hands.

결론

To reassemble your device, follow these instructions in reverse order.

Robert Tam

회원 가입일: 2013년 01월 30일

6 평판

안내서 2개 작성하였습니다

Cal Poly, Team 7-12, Maness Winter 2013 Cal Poly, Team 7-12, Maness Winter 2013 회원

CPSU-MANESS-W13S7G12

5 회원들

안내서 6개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 240