소개

Rear Cover Removal allows the inside of the Clie to be exposed for further replacement of internal components

부품

부품은 필요하지 않습니다.

  1. Tools needed:
    • Tools needed:

    • Tweezers

    • Philips Screwdriver

  2. Using Phillips screwdriver, remove 4 screws from the rear cover. Remove 1 screw from the right side. Remove 1 screw from the top
    • Using Phillips screwdriver, remove 4 screws from the rear cover.

    • Remove 1 screw from the right side.

    • Remove 1 screw from the top

  3. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Gently pry rear cover to remove USB port cover and Hold Switch. Gently pry rear cover to remove USB port cover and Hold Switch.
    • Gently pry rear cover to remove USB port cover and Hold Switch.

  5. Remove side cover. Gently pull the rear cover to separate from device.
    • Remove side cover.

    • Gently pull the rear cover to separate from device.

  6. Slowly pull rear cover from device being careful not to pull the speaker connection wire.
    • Slowly pull rear cover from device being careful not to pull the speaker connection wire.

    • Remove speaker wire from device.

    • The rear cover is now separated from the device.

결론

To reassemble your device, follow these instructions in reverse order.

Christopher M Garcia

회원 가입일: 2011년 04월 28일

11 평판

안내서 1개 작성함

CSU Los Angeles, Team 1-4, Nelson Spring 2011 CSU Los Angeles, Team 1-4, Nelson Spring 2011 회원

CSULA-NELSON-S11S1G4

5 회원들

안내서 2개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 11

전체 시간: 3,383