주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

If you have broken the outer panels of your DSC-W830, do not worry. This guide will take you through the correct steps of remove both the front and back panels.

부품

지정된 부품이 없습니다.

  1. Slide the lock at the bottom of the camera to "Open".
    • Slide the lock at the bottom of the camera to "Open".

    • The door to the battery pack is spring loaded.

  2. Slide the blue clip up and away from the battery.
    • Slide the blue clip up and away from the battery.

  3. Remove the battery.
    • Remove the battery.

  4. Remove the six 3.5mm Phillips #000 screws. Rotate the lock away from the camera. Rotate the lock away from the camera.
    • Remove the six 3.5mm Phillips #000 screws.

    • Rotate the lock away from the camera.

  5. Pry the device open with the plastic opening tool. There are two clips that help prevent the front panel from separating. There are two clips that help prevent the front panel from separating.
    • Pry the device open with the plastic opening tool.

    • There are two clips that help prevent the front panel from separating.

  6. Remove the two plastic spacers between the front and the back panels. The spacers may fall out when removing the panels. Carefully remove the back panel.
    • Remove the two plastic spacers between the front and the back panels.

    • The spacers may fall out when removing the panels.

    • Carefully remove the back panel.

결론

To reassemble your device, follow these instructions in reverse order.

Tong Tang

회원 가입일: 2016년 09월 15일

488 평판

안내서 4개 작성하였습니다

USF Tampa, Team 17-1, Blackwell Fall 2016 USF Tampa, Team 17-1, Blackwell Fall 2016 회원

USFT-BLACKWELL-F16S17G1

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 11

전체 시간: 649