이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.
소개
The camera will need to be completely disassembled to get to the flash, so only do this as as a last resort.
필요한 것
-
-
Open the battery compartment and remove the batteries.
-
Remove all of the visible screws on the outside of the case.
-
-
-
-
Remove all six screws on the front side of the motherboard circled in the picture.
-
Pull the motherboard from the rest of the housing.
-
-
-
Discharge the yellow capacitor attached to the flash unit by shorting the leads with a screw driver.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.