소개

This guide is used for taking apart the case to fix many of the issues of the Sony Cybershot DSC-P52.

부품

부품은 필요하지 않습니다.

  1. Open the battery compartment and remove the batteries.
    • Open the battery compartment and remove the batteries.

    • Remove all of the visible screws on the outside of the case.

    • There should be three of them that are all easily located.

  2. Open the memory card compartment.
    • Open the memory card compartment.

    • Remove the screw next to the memory card slot.

  3. Pull apart the front and back cover pieces carefully.
    • Pull apart the front and back cover pieces carefully.

    • The front cover should come completely free with little effort.

    • The back cover will still be attached to the circuit board.

  4. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  5. Simultaneously unclip all of the clips holding in the circuitry. Remove the back case.
    • Simultaneously unclip all of the clips holding in the circuitry. Remove the back case.

    • The circuitry will still be connected to the back case by ribbon cables.

  6. Open the case as shown.
    • Open the case as shown.

  7. Unclip the clip holding the ribbon cable in.
    • Unclip the clip holding the ribbon cable in.

    • Other ribbon cables might not have a clips.

  8. Pull the ribbon cable out.
    • Pull the ribbon cable out.

결론

To reassemble your device, follow these instructions in reverse order.

Trevor

회원 가입일: 2011년 01월 20일

277 평판

안내서 6개 작성하였습니다

Cal Poly, Team 3-43, Regan Winter 2011 Cal Poly, Team 3-43, Regan Winter 2011 회원

CPSU-REGAN-W11S3G43

4 회원들

안내서 10개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 354