주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

This simple 2 step guide will show you how to remove the front panel in order to maintain or replace it.

부품

지정된 부품이 없습니다.

  1. Remove all seven black 4 mm Philips #00 screws holding the front panel into place. Two on each of the sides of the camera and three on the bottom. Remove all seven black 4 mm Philips #00 screws holding the front panel into place. Two on each of the sides of the camera and three on the bottom.
    • Remove all seven black 4 mm Philips #00 screws holding the front panel into place. Two on each of the sides of the camera and three on the bottom.

  2. Gently lift the front panel up off the back of the camera prying up around the edges using a plastic opening tool or spudger if necessary. Gently lift the front panel up off the back of the camera prying up around the edges using a plastic opening tool or spudger if necessary. Gently lift the front panel up off the back of the camera prying up around the edges using a plastic opening tool or spudger if necessary.
    • Gently lift the front panel up off the back of the camera prying up around the edges using a plastic opening tool or spudger if necessary.

결론

To reassemble your device, follow these instructions in reverse order.

Daniel Surgenor

회원 가입일: 2015년 01월 23일

201 평판

안내서 2개 작성하였습니다

UWT Liner: Group 4 UWT Liner: Group 4 회원

Community

6 회원들

안내서 4개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 117