메인 콘텐츠로 스킵하기

소개

This repair guide will aid you in the steps to disassemble the Sony Cyber-shot DSC W150 in order to replace a scratched or broken back casing.

부품

지정된 부품이 없습니다.

  1. The screws from the camera are extremely small so it is a good idea to have a small container to hold all the screws as you remove them.
    • The screws from the camera are extremely small so it is a good idea to have a small container to hold all the screws as you remove them.

  2. Take your screwdriver and remove the bottom screws of the camera. (The picture shows the lens facing away from you and the LCD facing you.) There should be four silver screws.
    • Take your screwdriver and remove the bottom screws of the camera. (The picture shows the lens facing away from you and the LCD facing you.) There should be four silver screws.

  3. On the right side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and LCD screen facing you.)
    • On the right side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and LCD screen facing you.)

  4. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  5. On the left side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and the LCD screen facing you.)
    • On the left side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and the LCD screen facing you.)

  6. Gently remove the back casing by holding onto both sides of the camera and pulling them apart.
    • Gently remove the back casing by holding onto both sides of the camera and pulling them apart.

  7. Now, carefully pull off the back cover.
    • Now, carefully pull off the back cover.

  8. The two halves of the camera casing should now be separate.
    • The two halves of the camera casing should now be separate.

결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

iRobot

회원 가입일: 2009년 09월 24일

1 평판

안내서 624개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 2

전체 시간: 4,710