주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

How to replace the LCD screen from the Sony Cyber-shot DSC-W510.

  1. Place the Sony Cyber-shot DSC-W510 on the magnetic project mat. This will help keep the small screws organized.
    • Place the Sony Cyber-shot DSC-W510 on the magnetic project mat. This will help keep the small screws organized.

  2. Using the Phillips #00 screwdriver, unscrew the outside screws from the frame of the camera. There are five screws on the bottom of the camera and two on the side.
    • Using the Phillips #00 screwdriver, unscrew the outside screws from the frame of the camera.

    • There are five screws on the bottom of the camera and two on the side.

    • If the screws are stripped, visit the Removing a Stripped Screw Guide.

  3. Pry open the screen frame using a plastic opening tool. It may be necessary to start by prying at one end of the screen and moving around the edge of the screen frame, until it pops out.
    • Pry open the screen frame using a plastic opening tool.

    • It may be necessary to start by prying at one end of the screen and moving around the edge of the screen frame, until it pops out.

  4. Using the screw driver, unscrew the one screw on the control panel board. Using the screw driver, unscrew the one screw on the control panel board.
    • Using the screw driver, unscrew the one screw on the control panel board.

  5. Gently unplug the control panel from the motherboard outlet.
    • Gently unplug the control panel from the motherboard outlet.

  6. Using your hands, pry open the LCD screen from the metal board. Gently unplug the LCD screen from the motherboard.
    • Using your hands, pry open the LCD screen from the metal board.

    • Gently unplug the LCD screen from the motherboard.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

kyle

회원 가입일: 2015년 02월 05일

382 평판

안내서 3개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 968