소개

Disassembling the back cover of the camera so that we can repair components from the inside.

부품

부품은 필요하지 않습니다.

Slide the battery cover in the direction the arrow points.
  • Slide the battery cover in the direction the arrow points.

  • Pull the battery cover towards you.

댓글 쓰기

Flick the blue switch for the battery to pop out.
  • Flick the blue switch for the battery to pop out.

  • Remove the battery from the camera.

댓글 쓰기

  • Using the Phillips #00 Screwdriver, remove the two screws from the caution panel.

  • Remove that panel.

  • Careful for falling pieces.

댓글 쓰기

  • Remove the screw with a Phillips #00 Screwdriver from the right side of the camera (with '3x optical zoom' engraved on the side panel).

  • Remove that panel.

댓글 쓰기

  • Remove the screw using the Phillips #00 Screwdriver from the bottom the camera, closest to the back cover.

댓글 쓰기

  • Gently remove the back cover.

  • It may be a bit stiff, so use some force to remove it. Proceed with caution.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

kkfong91

회원 가입일: 2010년 10월 11일

293 평판

안내서 2개 작성하였습니다

Cal Poly, Team 9-20, Regan Fall 2010 Cal Poly, Team 9-20, Regan Fall 2010 회원

CPSU-REGAN-F10S9G20

5 회원들

안내서 9개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 3

전체 시간: 3,241