기기를 수리하세요 커뮤니티 상점

Sony Cyber-shot DSC-W730 Control board Replacement

소개

This could be a solution to the buttons on the back of the camera not working. This is an easy replacement. Just be careful with the ribbons.

필요한 것

  1. Sony Cyber-shot DSC-W730 Control board Replacement, Removing the Case: 1 단계, 이미지 1/3 Sony Cyber-shot DSC-W730 Control board Replacement, Removing the Case: 1 단계, 이미지 2/3 Sony Cyber-shot DSC-W730 Control board Replacement, Removing the Case: 1 단계, 이미지 3/3

    • Open the battery/memory card door and remove the 6 screws (.35cm) with a Philips 000 screwdriver. There will be two screws on the left and right sides, and two on the bottom.

    번역하기

  2. Sony Cyber-shot DSC-W730 Control board Replacement: 2 단계, 이미지 1/3 Sony Cyber-shot DSC-W730 Control board Replacement: 2 단계, 이미지 2/3 Sony Cyber-shot DSC-W730 Control board Replacement: 2 단계, 이미지 3/3

    • Take off the front part of the case with a plastic opening tool.

    번역하기

  4. Sony Cyber-shot DSC-W730 Control board Replacement: 3 단계, 이미지 1/2 Sony Cyber-shot DSC-W730 Control board Replacement: 3 단계, 이미지 2/2

    • Pull off the two silver side pieces on the left and right sides.

    번역하기

  5. Sony Cyber-shot DSC-W730 Control board Replacement: 4 단계, 이미지 1/2 Sony Cyber-shot DSC-W730 Control board Replacement: 4 단계, 이미지 2/2

    • Remove the main back piece. It should easily lift off.

    번역하기

  6. Sony Cyber-shot DSC-W730 Control board Replacement: 5 단계, 이미지 1/3 Sony Cyber-shot DSC-W730 Control board Replacement: 5 단계, 이미지 2/3 Sony Cyber-shot DSC-W730 Control board Replacement: 5 단계, 이미지 3/3

    • Unscrew the .45cm screw located on the upper right corner on the back of the camera. Once the screw is off, use the spudger and unclip the piece holding the top down on the upper left on the front of the camera. It should lift off with ease.

    번역하기

  7. Sony Cyber-shot DSC-W730 Control board Replacement, LCD Control Board: 6 단계, 이미지 1/2 Sony Cyber-shot DSC-W730 Control board Replacement, LCD Control Board: 6 단계, 이미지 2/2

    • Flip over the control board then use tweezers to pull out the ribbon connecting the circuit board to the motherboard.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Douglas Howe

회원 가입일: 01/08/15

510 평판

안내서 4개 작성하였습니다

배지: 18

배지 +15개 더

팀

USF Tampa, Team 9-4, Blackwell Winter 2015 USF Tampa, Team 9-4, Blackwell Winter 2015 회원

USFT-BLACKWELL-W15S9G4

3 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 19

30일 전: 22

전체 시간: 529