주요 콘텐츠로 건너뛰기

Sony DCR-DVD 108 LCD Screen Replacement

필요한 것

  1. Sony DCR-DVD 108 LCD Screen Replacement, LCD Screen: 1 단계, 이미지 1/1
    • Remove the front facing screw adjacent to the LCD screen using a J1 Phillips screwdriver. The screw is 2.8 mm in length.

  2. Sony DCR-DVD 108 LCD Screen Replacement: 2 단계, 이미지 1/1
    • Rotate the camera screen until the screw on the bottom is clearly visible, then unscrew with a Phillips #1 screwdriver. This screw is 2.8mm in length.

  3. Sony DCR-DVD 108 LCD Screen Replacement: 3 단계, 이미지 1/1
    • Rotate camera again to find #1 Phillips head screw, the screw length is about 2.8 mm long. A J1 screwdriver is advised.

  4. Sony DCR-DVD 108 LCD Screen Replacement: 4 단계, 이미지 1/1
    • Slowly pry apart the covers using a plastic spudger.

    • Be sure to disconnect the ZIF connector holding the ribbon cable in place. To do this, use a spudger to flip the black tab up, and pull the cable out with tweezers.

    • This photo shows a torn ribbon cable. Be sure to disconnect the ribbon cable before fully removing the LCD cover, to avoid damage to the device.

결론

To reassemble your device, follow these instructions in reverse order.

Elijah DeWolf

회원 가입일: 02/09/16

577 평판

안내서 5개 작성하였습니다

USF Tampa, Team 7-6, Cheng Spring 2016 USF Tampa, Team 7-6, Cheng Spring 2016 회원

USFT-CHENG-S16S7G6

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 21

전체 시간: 636