소개

This guide shows how to remove the phone keypad.

부품

부품은 필요하지 않습니다.

Remove the back cover and the battery.
  • Remove the back cover and the battery.

댓글 쓰기

Remove the 4 screws using a T6 precision screwdriver.
  • Remove the 4 screws using a T6 precision screwdriver.

  • Flip open the phone, and keep the back cover facing you.

댓글 쓰기

  • Take the plastic opening tool and run it between the phone case and phone body to loosen the key pad while the phone is open.

  • Note: There are 2 clamps that lock it to the phone case (1 on each side).

댓글 쓰기

  • Flip the phone over and lift straight up on the key pad to remove it.

  • Be sure to hold the phone flat (parallel to the table), because there are loose parts that may fall out.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Jory Benitez

회원 가입일: 2010년 04월 16일

1 평판

안내서 1개 작성함

Cal Poly, Team 7-12, Maness Spring 2010 Cal Poly, Team 7-12, Maness Spring 2010 회원

CPSU-MANESS-S10S7G12

4 회원들

안내서 10개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 2,583