소개

In order to keep your device in working order, the tape transport unit may need to be replaced.

부품

부품은 필요하지 않습니다.

  1. Remove the eight (8) Phillips #00 screws. There are six (6) screws on the bottom of the camera and two (2) screws beneath the back light button.
    • Remove the eight (8) Phillips #00 screws. There are six (6) screws on the bottom of the camera and two (2) screws beneath the back light button.

    댓글 쓰기

  2. Remove the five (5) Phillips #00 cassette side screws.
    • Remove the five (5) Phillips #00 cassette side screws.

    댓글 쓰기

    • Remove the three (3) Phillips #00 screws located on the top of the lens side cover.

    댓글 쓰기

    • Remove the Phillips #00 screw holding the microphone on.

    댓글 쓰기

    • Remove the two (2) Phillips #00 screws from lens side cover.

    댓글 쓰기

    • Slide the lens side cover away from camera.

    댓글 쓰기

    • Remove the Phillips #00 screw from the tape transport slider.

    댓글 쓰기

    • Remove the four (4) Phillips #00 screws located on the top of the camera.

    댓글 쓰기

    • Remove the electrical connector from camera.

    댓글 쓰기

    • The tape transport unit is now free from the camera.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Emma

회원 가입일: 2011년 10월 06일

47 평판

안내서 4개 작성하였습니다

UW Stout, Team 1-4, Zhou Fall 2011 UW Stout, Team 1-4, Zhou Fall 2011 회원

UWSTOUT-ZHOU-F11S1G4

5 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 4

지난 30일: 13

전체 시간: 2,422