1. Note: This camera came without a battery, thus all pictures shown will be missing a battery.
    • Note: This camera came without a battery, thus all pictures shown will be missing a battery.

    • Locate the battery pack which can be found on the back side of the camera below the viewfinder.

    • Push in the small button on the bottom of the camera, marked with the red circle, then slide the entire switch forward, marked with the yellow rectangle.

  2. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  3. Slide the battery out of the back of the camera.
    • Slide the battery out of the back of the camera.

    • The battery can be inserted by sliding it back into place in a similar manner to how it was removed.

결론

To reassemble your device, follow these instructions in reverse order.

Lauren

회원 가입일: 2011년 01월 05일

244 평판

안내서 2개 작성하였습니다

Cal Poly, Team 7-44, Regan Winter 2011 Cal Poly, Team 7-44, Regan Winter 2011 회원

CPSU-REGAN-W11S7G44

5 회원들

안내서 5개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 11

전체 시간: 2,989