기기를 수리하세요 커뮤니티 상점

Sony ICF-C1T Speaker Replacement

소개

This step-by-step guide will allow you to follow along and replace the faulty speaker of your device.

필요한 것

  1. Sony ICF-C1T Speaker Replacement, Speaker: 1 단계, 이미지 1/2 Sony ICF-C1T Speaker Replacement, Speaker: 1 단계, 이미지 2/2

    • Using a Phillips #00 screwdriver, remove the four 14mm screws from the underside of the device.

    • Be sure that the device is unplugged and the battery has been removed before tampering with the device.

    번역하기

  2. Sony ICF-C1T Speaker Replacement: 2 단계, 이미지 1/1

    • Using the opening tool, gently pry the top portion from the side section of your device.

    번역하기

  3. Sony ICF-C1T Speaker Replacement: 3 단계, 이미지 1/2 Sony ICF-C1T Speaker Replacement: 3 단계, 이미지 2/2

    • Gently pull the top of the clock away from the rest of the device.

    • Be careful when tugging on this piece of the clock. The clock display is located directly inside the front face and is connected by multiple wires.

    번역하기

  5. Sony ICF-C1T Speaker Replacement: 4 단계, 이미지 1/2 Sony ICF-C1T Speaker Replacement: 4 단계, 이미지 2/2

    • Using the Phillips #00 screwdriver, remove the two 14mm screws from the top of the motherboard.

    • Be careful to avoid the sharp pieces on the motherboard when handling the device.

    번역하기

  6. Sony ICF-C1T Speaker Replacement: 5 단계, 이미지 1/3 Sony ICF-C1T Speaker Replacement: 5 단계, 이미지 2/3 Sony ICF-C1T Speaker Replacement: 5 단계, 이미지 3/3

    • Remove the Phillips #00 screw from the bottom of the white and blue box.

    • Remove the Phillips #00 screw from behind the white and blue box.

    • After unscrewing the white box, gently pull it out. This will allow for more room to access the speaker.

    번역하기

  7. Sony ICF-C1T Speaker Replacement: 6 단계, 이미지 1/1

    • To separate the motherboard completely, you can cut the red and black wires that are attached to the speaker. This will allow you to access the speaker fully.

    • Use caution when tampering with the wires and sharp parts of the device.

    번역하기

  8. Sony ICF-C1T Speaker Replacement: 7 단계, 이미지 1/2 Sony ICF-C1T Speaker Replacement: 7 단계, 이미지 2/2

    • Use the plastic opening tool and the spudger to separate the speaker from the device by tracing its outline and loosening the glue.

    • Do this step gently as to not damage the device or cause harm to yourself.

    • When reassembling the device, you will need to use glue to place the new speaker back in its place.

    • It would be wise to test the device after reconnecting wires, before screwing and gluing the parts back together.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Megan

회원 가입일: 01/30/15

275 평판

안내서 2개 작성하였습니다

배지: 10

배지 +7개 더

팀

University of Kentucky Louisville, Team 1-5, Rountree Winter 2015 University of Kentucky Louisville, Team 1-5, Rountree Winter 2015 회원

LOUISVILLE-ROUNTREE-W15S1G5

3 회원들

안내서 5개 작성하였습니다

댓글 한 개

can I connect aux out port to speaker?

Dong-Hwan Shin - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 16

전체 시간: 2,574