주요 콘텐츠로 건너뛰기

Sony ICF-P26 Antenna Replacement

필요한 것

  1. Sony ICF-P26 Antenna Replacement, Antenna: 1 단계, 이미지 1/2 Sony ICF-P26 Antenna Replacement, Antenna: 1 단계, 이미지 2/2
    • Power off and disconnect the radio from any power source.

  2. Sony ICF-P26 Antenna Replacement: 2 단계, 이미지 1/3 Sony ICF-P26 Antenna Replacement: 2 단계, 이미지 2/3 Sony ICF-P26 Antenna Replacement: 2 단계, 이미지 3/3
    • Use a mini screwdriver to remove the two screws from the battery compartment.

    • Gently insert an opening tool where the FM/AM/Off switch is, to force your way up.

    • Insert the opening tool in the other side where the volume and the earphone go.

    • You will hear hinges pop open.

  3. Sony ICF-P26 Antenna Replacement: 3 단계, 이미지 1/3 Sony ICF-P26 Antenna Replacement: 3 단계, 이미지 2/3 Sony ICF-P26 Antenna Replacement: 3 단계, 이미지 3/3
    • Use the mini screwdriver to remove the screw holding the motherboard.

    • Unscrew the damaged antenna.

  4. Sony ICF-P26 Antenna Replacement: 4 단계, 이미지 1/3 Sony ICF-P26 Antenna Replacement: 4 단계, 이미지 2/3 Sony ICF-P26 Antenna Replacement: 4 단계, 이미지 3/3
    • Use the mini screwdriver to replace the new antenna.

  5. Sony ICF-P26 Antenna Replacement: 5 단계, 이미지 1/2 Sony ICF-P26 Antenna Replacement: 5 단계, 이미지 2/2
    • Use the mini screwdriver to assemble the motherboard.

  6. Sony ICF-P26 Antenna Replacement: 6 단계, 이미지 1/3 Sony ICF-P26 Antenna Replacement: 6 단계, 이미지 2/3 Sony ICF-P26 Antenna Replacement: 6 단계, 이미지 3/3
    • Use the mini screwdriver to assemble the cover.

    • Insert the batteries.

  7. Sony ICF-P26 Antenna Replacement: 7 단계, 이미지 1/2 Sony ICF-P26 Antenna Replacement: 7 단계, 이미지 2/2
    • Switch on the radio.

결승점

다른 4명이 해당 안내서를 완성하였습니다.

Olaloye Thontteh

회원 가입일: 07/12/20

253 평판

안내서 1개 작성함

York University, Team S1-G16, Allen Summer 2020 York University, Team S1-G16, Allen Summer 2020 회원

YORK-ALLEN-SU20S1G16

1 회원

안내서 1개 작성하였습니다

댓글 2개

Where would one acquire a compatible replacement antenna for this model of radio?

Mason Smith - 답글

Thank you so much. The difficulty is opening the case. You explained it very well. My problem was the dirty potentiometer. I simply poured enough isopropyl alcool on it, to "wash" it, it flowed inside, turn it few times, that was all. Works as new. Thank you.

Jean-Yves Béguec - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 14

30일 전: 50

전체 시간: 3,556