주요 콘텐츠로 건너뛰기

Sony MDR-XB450AP Extra Bass Headphone Swivel Replacement

필요한 것

  1. Sony MDR-XB450AP Extra Bass Headphone Swivel Replacement, Swivel: 1 단계, 이미지 1/1
    • Begin by laying the headphones down flat with the speakers facing up.

    • Be sure to unplug the headphones from any other devices.

  2. Sony MDR-XB450AP Extra Bass Headphone Swivel Replacement: 2 단계, 이미지 1/2 Sony MDR-XB450AP Extra Bass Headphone Swivel Replacement: 2 단계, 이미지 2/2
    • Next, take out the screws that hold the front plate, using a J00 screwdriver.

    • Repeat for both the left and right screws.

    • These screws are very small. It is helpful to have a spot prepared to put the screws to avoid losing pieces.

  3. Sony MDR-XB450AP Extra Bass Headphone Swivel Replacement: 3 단계, 이미지 1/1
    • Now that the screws have been removed, pull away the plastic casing that covers the swivel piece (directly above the speaker).

  4. Sony MDR-XB450AP Extra Bass Headphone Swivel Replacement: 4 단계, 이미지 1/1
    • Now that the swivel piece is exposed, use a J00 screwdriver to unscrew the center screw.

    • Repeat this process on both sides if necessary.

    • This center screw is the piece that retains the swivel action, unscrew completely and remove to replace.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Terrance Gallaher

회원 가입일: 01/18/17

870 평판

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 14

전체 시간: 3,695