소개
When completing this guide, remember the front buttons are flimsy so handle with care.
필요한 것
-
-
Use a Phillips #00 screwdriver to unscrew the two 5 mm screws located on the bottom of the back of the device.
-
-
-
Peel back the layer of tape along with the processor, which is located just below the battery, using the tweezers and the spudger.
-
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.