주요 콘텐츠로 건너뛰기

Sony SRS-X3 Battery Replacement

필요한 것

  1. Sony SRS-X3 Battery Replacement, Battery: 1 단계, 이미지 1/1
    • Remove the 6 philips head screws using the PH1 bit.

  2. Sony SRS-X3 Battery Replacement: 2 단계, 이미지 1/1
    • Remove the 3 philips head screws holding in the green circuit board

  3. Sony SRS-X3 Battery Replacement: 3 단계, 이미지 1/1
    • Unclip the battery pack and replace it with another one.

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

Seth Taylor Rollins

회원 가입일: 01/17/17

221 평판

안내서 1개 작성함

댓글 2개

Can you give the battery # on this please

Dan Clark - 답글

Good instructions. I had one problem when removing the green circuit card. The ribbon cable came out. On mine there was a small black retention bar that I flipped open to allow the ribbon cable to reinsert, then I returned the retention bar back down to secure the ribbon cable in place. It worked fine after that.

Harpo - 답글

댓글 쓰기

조회 통계:

24 시간 전: 4

7일 전: 17

30일 전: 84

전체 시간: 6,654