주요 콘텐츠로 건너뛰기

Sony SRS-XB43 Faceplate Replacement

필요한 것

  1. Sony SRS-XB43 Faceplate Replacement, Faceplate: 1 단계, 이미지 1/2 Sony SRS-XB43 Faceplate Replacement, Faceplate: 1 단계, 이미지 2/2
    • Insert the metal spudger into the mesh's seam/opening located at the bottom of the speaker.

    • Begin applying pressure, prying along the run of the seam until the mesh cover begins to come loose.

    • Fully open the hinged mesh cover and pry it off the unit.

  2. Sony SRS-XB43 Faceplate Replacement: 2 단계, 이미지 1/1
    • Turn the speaker so the back is facing you.

    • Remove the factory tamper seal below the speaker volume toggle to reveal a single screw.

    • Remove the single screw using a T8 Torx.

  3. Sony SRS-XB43 Faceplate Replacement: 3 단계, 이미지 1/1
    • Remove all ten screws using a Phillips #1 screwdriver.

  4. Sony SRS-XB43 Faceplate Replacement: 4 단계, 이미지 1/2 Sony SRS-XB43 Faceplate Replacement: 4 단계, 이미지 2/2
    • Slowly lift the speaker face off of the housing unit.

    • Unplug the six wires connecting the faceplate to the motherboard.

결론

To reassemble your device, follow these instructions in reverse order.

Kristen Gismondi

회원 가입일: 11/12/14

83,554 평판

안내서 205개 작성하였습니다

iFixit iFixit 회원

Staff

138 회원들

안내서 17,679개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 2

30일 전: 10

전체 시간: 147