소개

If your current battery is dead or no longer works, you will need to remove the battery. This is shown below in just a few simple steps.

Hazards

Keep out of reach of children and pets.

DO NOT attempt to teardown or repair your device under the influence of drugs or alcohol.

DO NOT ingest any parts of the system.

Use the correct tools as stated in the tools section.

DO NOT touch any gold connectors on interior or exterior of the system.

Make sure system is unplugged and turned off before performing any maintenance on the system.

Set the computer display-side down.
  • Set the computer display-side down.

  • Unlock the battery by sliding the port-side latch to the 'unlock' position.

댓글 쓰기

On the opposite side of the battery, press the release latch and slide the battery away from the main body to remove.
  • On the opposite side of the battery, press the release latch and slide the battery away from the main body to remove.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Ashley Brooks

회원 가입일: 2010년 04월 09일

264 평판

안내서 4개 작성하였습니다

Cal Poly, Team 25-89, Amido Spring 2010 Cal Poly, Team 25-89, Amido Spring 2010 회원

CPSU-AMIDO-S10S25G89

4 회원들

안내서 52개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 4

전체 시간: 3,472