주요 콘텐츠로 건너뛰기

Sony Walkman NWZ-E438 Screen Replacement

필요한 것

  1. Sony Walkman NWZ-E438 Screen  Replacement, Disassembling Sony Walkman NWZ-E438: 1 단계, 이미지 1/1
    • Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.

    • Keep the Phillips PH000 screwdriver aside for further steps in the guide. It will be the only screwdriver needed for this replacement.

  2. Sony Walkman NWZ-E438 Screen  Replacement: 2 단계, 이미지 1/1
    • Use a small prying tool to carefully pry open the back of the device.

  3. Sony Walkman NWZ-E438 Screen  Replacement, Screen: 3 단계, 이미지 1/1
    • Pull up the 2 copper strips connecting the outside of the device to the inside of the device.

  4. Sony Walkman NWZ-E438 Screen  Replacement: 4 단계, 이미지 1/1
    • Using the small, plastic prying tool wedge it between the bottom of the frame and the outer frame.

    • Slowly circle the device, popping the outside of the frame off.

  5. Sony Walkman NWZ-E438 Screen  Replacement: 5 단계, 이미지 1/1
    • To remove the screen, use the fine point tweezers and lift up on the metal piece at the bottom of the frame.

  6. Sony Walkman NWZ-E438 Screen  Replacement: 6 단계, 이미지 1/1
    • To remove screen from metal backing, use fine point tweezers to go in between the screen and metal backing and slowly pull them apart.

  7. Sony Walkman NWZ-E438 Screen  Replacement: 7 단계, 이미지 1/1
    • The screen will be removed.

결론

To reassemble your device, follow these instructions in reverse order.

Cheryl Zinn

회원 가입일: 10/08/15

525 평판

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 2

전체 시간: 674