소개

This guide will take you step by step through the process of replacing your Sony Xperia L2 screen. This guide will help those who have a broken or unresponsive screen to extend the life of your phone.

  1. Before disassembling the battery, power off your Sony Xperia L2 LTE. Remove SIM card tray.
    • Before disassembling the battery, power off your Sony Xperia L2 LTE.

    • Remove SIM card tray.

  2. Use the plastic opening tool to pry the back case of the phone off. The fingerprint sensor is connected to the motherboard. Disconnect the fingerprint sensor.
    • Use the plastic opening tool to pry the back case of the phone off.

    • The fingerprint sensor is connected to the motherboard.

    • Disconnect the fingerprint sensor.

  3. Unscrew all 10 screws from the top and bottom portion of the phone using a T4 Torx screwdriver.
    • Unscrew all 10 screws from the top and bottom portion of the phone using a T4 Torx screwdriver.

    • Use the plastic opening tool to remove the unscrewed top and bottom portion of the phone.

  4. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  5. Disconnect the battery cable from the motherboard. Pry up the battery and remove it from the device.
    • Disconnect the battery cable from the motherboard.

    • Pry up the battery and remove it from the device.

    • Battery may have adhesive that needs to be removed prior to removing the battery.

  6. Unclip circuit connectors from phone to motherboard.
    • Unclip circuit connectors from phone to motherboard.

  7. Use blue plastic opening tool to pry off the motherboard. Use blue plastic opening tool to pry off the motherboard. Use blue plastic opening tool to pry off the motherboard.
    • Use blue plastic opening tool to pry off the motherboard.

  8. Microwave the iOpener for 30 seconds. Place the iOpener on the phone screen for 90 seconds to loosen the adhesive.
    • Microwave the iOpener for 30 seconds.

    • Place the iOpener on the phone screen for 90 seconds to loosen the adhesive.

    • Use the suction tool and a pick to remove the screen from the phone.

    • The iOpener will be very hot, so be careful when handling it. Use an oven mitt if necessary.

  9. Unhook the screen sensor from the phone to detach the screen from the device.
    • Unhook the screen sensor from the phone to detach the screen from the device.

결론

To reassemble your device, follow these instructions in reverse order.

Carrie Schmitt

회원 가입일: 2018년 09월 10일

199 평판

안내서 2개 작성하였습니다

University of Alabama, Team S2-G6, Bedsole Fall 2018 University of Alabama, Team S2-G6, Bedsole Fall 2018 회원

UA-BEDSOLE-F18S2G6

4 회원들

안내서 5개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 12

전체 시간: 97