소개
Follow this guide to use a spark tester to test the ignition system on a 2019 Echo Power Pruner model PPT-2620.
This procedure requires two people.
필요한 것
-
-
Use a T27 Torx screwdriver to remove the two screws securing the bottom of the muffler cover to the motor.
-
-
-
-
Connect the spark plug boot to the left terminal of the ignition checker.
-
-
-
Watch for a spark in the spark window while a second person pulls the starter to crank the engine.
-
Consult the ignition checker instruction manual to troubleshoot the device.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.