기기를 수리하세요 커뮤니티 상점

Spin Master Hatchimal Draggle Fur Replacement

소개

Toys go through a lot, and many times they get dirty. This guide will show you how to remove the fur for further cleaning or full replacement.

필요한 것

  1. Spin Master Hatchimal Draggle Fur Replacement, Plastic Wing Replacement: 1 단계, 이미지 1/1

    • lay the Hatchimal on its side.

    편집

  2. Spin Master Hatchimal Draggle Fur Replacement: 2 단계, 이미지 1/1

    • Using the plastic opening tool, push in on the purple clip.

    편집

  3. Spin Master Hatchimal Draggle Fur Replacement: 3 단계, 이미지 1/1

    • Pull the wing off of the hatchimal.

    • The wing should come off with little resistance.

    편집

  4. Spin Master Hatchimal Draggle Fur Replacement, Fur Replacement: 4 단계, 이미지 1/2 Spin Master Hatchimal Draggle Fur Replacement, Fur Replacement: 4 단계, 이미지 2/2

    • Cut the fur retaining zip-tie with a pair of scissors.

    편집

  6. Spin Master Hatchimal Draggle Fur Replacement: 5 단계, 이미지 1/2 Spin Master Hatchimal Draggle Fur Replacement: 5 단계, 이미지 2/2

    • Lift the fur up until it can't go further.

    편집

  7. Spin Master Hatchimal Draggle Fur Replacement: 6 단계, 이미지 1/3 Spin Master Hatchimal Draggle Fur Replacement: 6 단계, 이미지 2/3 Spin Master Hatchimal Draggle Fur Replacement: 6 단계, 이미지 3/3

    • Use the spudger tool to push up on the black clip to free it.

    • Pull the clip out.

    편집

  8. Spin Master Hatchimal Draggle Fur Replacement: 7 단계, 이미지 1/3 Spin Master Hatchimal Draggle Fur Replacement: 7 단계, 이미지 2/3 Spin Master Hatchimal Draggle Fur Replacement: 7 단계, 이미지 3/3

    • Lift fur up to reveal the next set of clips.

    • Insert a spudger to push up on the black clip to free it.

    • Pull out the clip.

    편집

  9. Spin Master Hatchimal Draggle Fur Replacement: 8 단계, 이미지 1/2 Spin Master Hatchimal Draggle Fur Replacement: 8 단계, 이미지 2/2

    • Lift the fur up and over the Hatchimals Head.

    • Remove the six 12mm Phillips #00 screws from then body.

    편집

  10. Spin Master Hatchimal Draggle Fur Replacement: 9 단계, 이미지 1/2 Spin Master Hatchimal Draggle Fur Replacement: 9 단계, 이미지 2/2

    • Pull the casing apart.

    • Remove the yellow speaker cable.

    편집

  11. Spin Master Hatchimal Draggle Fur Replacement: 10 단계, 이미지 1/3 Spin Master Hatchimal Draggle Fur Replacement: 10 단계, 이미지 2/3 Spin Master Hatchimal Draggle Fur Replacement: 10 단계, 이미지 3/3

    • Remove the three 7mm Phillips #00 screws from the head.

    • Remove the wheel base and the circuit board carefully not to damage the spring.

    편집

  12. Spin Master Hatchimal Draggle Fur Replacement: 11 단계, 이미지 1/2 Spin Master Hatchimal Draggle Fur Replacement: 11 단계, 이미지 2/2

    • Push the six black fur clips out using the spudger.

    • Remove the fur completely.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Kimberly Searles

회원 가입일: 02/14/18

340 평판

안내서 2개 작성하였습니다

배지: 9

배지 +6개 더

팀

USF Tampa, Team S1-G5, Nance Spring 2018 USF Tampa, Team S1-G5, Nance Spring 2018 회원

USFT-NANCE-S18S1G5

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 3

30일 전: 7

전체 시간: 720